pc screen representient install hirens onto usb stick for pc troubleshooting and recovery

DIY Set Up Hiren’s Boot CD on a USB Drive

Learn how to set up Hiren’s Boot CD on a USB drive with this comprehensive guide. Hiren’s Boot CD is an essential toolkit for diagnosing and repairing computer issues, especially when your system fails to boot. Follow step-by-step instructions to create a bootable USB drive using Rufus, enabling dual EFI/BIOS boot mode, and troubleshoot your computer effectively.

What You Need

  • A USB flash drive (at least 1GB in size)
  • Hiren’s Boot CD ISO file
  • Rufus utility

Steps to Set Up Hiren’s Boot CD on a USB Drive

  1. Download Hiren’s Boot CD ISO: Visit the official Hiren’s Boot CD download page and download the latest ISO file.
  2. Download Rufus: Go to the Rufus website and download the latest version of Rufus.
  3. Prepare the USB Drive: Insert your USB flash drive into your computer. Open Rufus and select your USB drive from the “Device” dropdown menu.
  4. Select the ISO File: In Rufus, click the “SELECT” button and choose the Hiren’s Boot CD ISO file you downloaded.
  5. Enable EFI/BIOS Bootup: Press Alt-E in Rufus to enable dual UEFI/BIOS boot mode.
  6. Configure Rufus Settings:
    • Partition scheme: MBR
    • File system: FAT32
    • Volume label: Hiren’s Boot CD
  7. Create the Bootable USB: Click the “START” button in Rufus. A warning message will appear, informing you that all data on the USB drive will be erased. Click “OK” to proceed.
  8. Wait for the Process to Complete: Rufus will now create the bootable USB drive. This process may take a few minutes. Once it’s done, you can close Rufus and safely remove your USB drive.

Booting from the USB Drive

To use Hiren’s Boot CD from your USB drive, you’ll need to change the boot order in your computer’s BIOS settings to boot from the USB drive first. Here’s how:

  1. Restart your computer and enter the BIOS setup (usually by pressing a key like F2, F12, DEL, or ESC during startup).
  2. Navigate to the boot menu and set the USB drive as the first boot device.
  3. Save the changes and exit the BIOS setup. Your computer should now boot from the USB drive, and you’ll see the Hiren’s Boot CD menu.

Conclusion

Setting up Hiren’s Boot CD on a USB drive is a straightforward process that can save you a lot of time and hassle when dealing with computer issues. With this powerful toolkit at your disposal, you’ll be well-equipped to handle a variety of troubleshooting tasks.

Scroll to Top